Conductive
VEGAKON: Proven level detection
Measuring principle and applications
The instruments work according to the conductive measuring principle and are used in conductive liquids. The probe detects the product resistance when being immersed. A low alternating current flows which is detected by the integrated electronics and converted into a respective switching signal. The switching signal is determined via the mounting position or the length of the respective probe. The easy and robust construction of the sensors offers a maintenance free and reliable level detection in all areas of industrial measurement technique. Typical applications are e.g. overfill protection, pump control or dry run protection.
Conductive probes EL: Flexible determination of the switching point
Measuring principle and application
The instruments are used for level detection in conductive liquids. When the electrode is immersed, the product resistance is evaluated through the connected VEGATOR signal conditioning instrument. A low alternating current flows which is detected by VEGATOR and converted into a respective switching signal. The switching signal is determined via the mounting position or the length of the respective probe. The easy and robust construction of the sensors offers a maintenance free and reliable level detection in all areas of industrial measurement technique. Typical applications are e.g. overfill protection, pump control or dry run protection.
|
Conductive level switch for liquids
 |
|
Conductive multiple rod level switch
|
|
Conductive, PTFE partly insulated rod electrode
|
|
Conductive, PTFE partly insulated multiple rod electrode
|
|
Conductive, PP partly insulated multiple rod electrode
|
|
Conductive, PP/FEP partly insulated multiple cable electrode
|
|
Conductive, PE partly insulated rod electrode
|
|
Signal conditioning instrument for level signalling for carrier rail mounting
|
|
Signal conditioning instrument for level signal
|